3D Printing

Farsoon launches FS4X metal LPBF platform for series production

Farsoon launches FS4X metal LPBF platform for series production

Key Takeaways

  • FS4X is Farsoon’s new metal LPBF system aimed at series‑production volumes.
  • Build envelope: 425 × 425 × 550 mm (≈ 99 L).
  • Laser options: 4 × 2 kW or 6 × 1 kW fiber lasers with advanced beam‑shaping.
  • Integrated automation includes in‑situ scanner calibration, multi‑laser alignment, and a sealed tool‑airlock for blade changes.
  • Engineering controls (multi‑layer gas flow, recirculating filtration, chamber‑pressure regulation) target repeatable part quality and reduced downtime.

Introduction

Farsoon Technologies has rolled out the FS4X, a metal laser powder‑bed fusion (LPBF) platform built expressly for high‑mix, high‑volume production. The machine blends multi‑laser capability, tightly regulated build conditions, and a modular material‑handling architecture to meet the cost, reliability, and scalability demands of industrial manufacturers.

Application‑Matched Performance

Build Volume & Power Configurations

Configuration Laser Count Laser Power per Unit Total Laser Power Beam‑Shaping Options
FS4X‑4K 4 2 kW (fiber) 8 kW Variable spot size, adaptive raster
FS4X‑6K 6 1 kW (fiber) 6 kW Variable spot size, adaptive raster
  • Build envelope: 425 mm × 425 mm × 550 mm (≈ 99 L), accommodating large aerospace brackets, automotive engine components, and medical implants.
  • Beam shaping enables both high‑resolution (≈ 30 µm spot) and high‑throughput (≈ 100 µm spot) strategies, letting users fine‑tune melt pool dynamics for part‑specific requirements.

Open Architecture

The FS4X’s open‑platform design allows manufacturers to upload custom material libraries, adjust process windows, and integrate third‑party inspection tools without firmware restrictions. This flexibility is crucial for series production where part families evolve over time.

Engineering Features for Repeatable Operation

Optical Consistency

  • Automated in‑situ scanner calibration runs before each build, correcting focal drift within ± 5 µm.
  • Multi‑laser alignment maintains inter‑laser spacing tolerance of ± 10 µm, ensuring uniform energy distribution across the build plane.

Environmental Control

  • Multi‑layer gas flow (up to 12 m³/min) sweeps inert gas across each powder layer, minimizing oxidation.
  • Recirculating filtration captures > 99.9 % of airborne particles > 0.3 µm, extending powder life.
  • Chamber pressure is held at 0.2 MPa ± 0.01 MPa with active feedback, stabilizing melt pool dynamics.

Mechanical Design

  • A one‑piece machined build cylinder eliminates joint‑related powder leakage, reducing contamination risk.
  • Linear‑encoder feedback provides closed‑loop Z‑axis control with positioning repeatability of ± 2 µm.
  • Zero‑point positioning enables rapid cylinder swaps while preserving alignment.
  • Low‑drag recoater (blade width 0.5 mm, travel speed up to 300 mm/s) minimizes powder disturbance, improving layer uniformity.
  • Dedicated tool airlock permits blade exchange without venting the main chamber, cutting cycle time by up to 30 % compared with conventional open‑chamber designs.

These engineering choices collectively target stable processing, lower maintenance overhead, and fewer setup errors, which are critical for qualified, repeatable series production.

Competitive Context

Parameter Farsoon FS4X Competitor A (e.g., EOS M 400) Competitor B (e.g., GE Additive Concept)
Build Volume (L) 99 120 80
Max Laser Power 8 kW (4 × 2 kW) 4 kW (single) 5 kW (dual)
Powder Recoater Type Low‑drag blade Roller Blade
In‑situ Calibration Yes (auto) Manual Yes (partial)
Tool Airlock Dedicated None Shared
Target Market Series production Large‑part prototyping Aerospace/medical

The FS4X’s modular laser array and sealed tool‑airlock give it a distinct edge for manufacturers focused on high‑mix, high‑volume workflows.

Bottom Line

Farsoon’s FS4X delivers a robust, modular LPBF solution that bridges the gap between prototyping and true series production. With a sizable 99‑liter build volume, configurable laser power, and a suite of automation and environmental controls, the platform promises repeatable part quality while keeping operational costs in check. For manufacturers seeking to scale metal additive manufacturing without sacrificing flexibility or reliability, the FS4X positions itself as a compelling, production‑ready alternative.

Related Machines for Sale

Browse all →

Related Articles