Key Takeaways
- Axtra3D expands the Lumia X1 material suite with Ultracur3D xMOLD (dissolvable tooling) and ATARU BLACK (high‑temperature engineering resin).
- xMOLD can cut tooling expenses by up to 90 % and enables rapid, under‑cut‑friendly mold designs.
- ATARU BLACK offers a glass‑transition temperature (Tg) of ~200 °C, tensile strength > 70 MPa, and excellent dimensional stability for demanding aerospace and automotive parts.
- Both resins retain the Lumia X1’s native 0.05 mm layer resolution and ±0.1 mm dimensional accuracy, broadening the platform’s direct‑ and indirect‑manufacturing capabilities.
New Materials for the Lumia X1 Platform
At Formnext 2026, Axtra3D announced two photopolymers that extend the Lumia X1’s industrial reach:
| Feature | Ultracur3D xMOLD (AM Marketplace) | ATARU BLACK (QTREX) |
|---|---|---|
| Primary use | Dissolvable molds for injection molding | High‑temperature engineering parts |
| Cost reduction | Up to 90 % versus metal tooling | N/A (focus on performance) |
| Tg / heat resistance | ~150 °C (suitable for most thermoplastics) | ≈200 °C (Vicat ≥210 °C) |
| Tensile strength | 45 MPa (typical for sacrificial resins) | > 70 MPa |
| Dimensional accuracy | ±0.1 mm (ISO‑2768‑m) | ±0.1 mm |
| Recommended layer thickness | 0.05 mm – 0.10 mm | 0.05 mm – 0.15 mm |
| Post‑process | Water‑based dissolution, residue‑free | UV cure + thermal post‑cure (up to 180 °C) |
| Typical applications | Prototype tooling, low‑volume production, complex undercuts | Aerospace brackets, automotive heat shields, consumer‑grade housings |
Both resins leverage the Lumia X1’s 405 nm laser system and its continuous‑layer printing mode, delivering smooth surface finishes (Ra ≈ 2 µm) without additional sanding.
Ultracur3D xMOLD – Dissolvable Tooling for Injection Molding
Developed by AM Marketplace, xMOLD is a water‑soluble photopolymer designed for “sacrificial” molds. Engineers can print a mold directly from a CAD model, inject a thermoplastic (e.g., ABS, PP, or PC), then dissolve the mold in warm water (≈ 60 °C) to release the part.
Why It Matters
- Cost Efficiency: AM Marketplace reports tooling cost reductions of up to 90 % for low‑volume runs, eliminating the need for CNC‑machined steel cores.
- Design Freedom: The resin supports undercuts, lattice structures, and intricate cooling channels that would be prohibitively expensive in metal.
- Speed: The end‑to‑end workflow—from CAD to molded part—shrinks from weeks to 48–72 hours on a single Lumia X1 unit.
Core Benefits
- Residue‑free dissolution eliminates contamination of downstream processes.
- Dimensional fidelity (±0.1 mm) ensures tight tolerances for functional prototypes.
- Compatible with common thermoplastics, enabling rapid material swaps during validation.
Target Applications
- Prototype injection‑molded components for automotive, aerospace, and consumer goods.
- Bridge tooling where a short‑run metal tool would be uneconomical.
- Complex geometry validation such as interlocking features or internal cavities.
ATARU BLACK – High‑Temperature Engineering Resin
QTREX’s ATARU BLACK joins the Lumia X1 lineup as a premium engineering photopolymer. Its formulation targets parts that must endure elevated temperatures while maintaining structural integrity.
Performance Highlights
- Glass‑transition temperature (Tg): ~200 °C, surpassing most standard SLA resins.
- Tensile strength: > 70 MPa, comparable to injection‑molded PA12.
- Heat deflection temperature (HDT): 190 °C (1 MPa load).
- Electrical insulation: Volume resistivity > 10¹⁴ Ω·cm, suitable for electronic housings.
Processing Details
- Print settings: 405 nm laser, 0.05 mm layer height, 20 µm XY resolution.
- Post‑cure: 30 min UV exposure followed by a 2‑hour thermal bake at 180 °C to achieve full mechanical properties.
Ideal Use Cases
- Aerospace brackets and heat shields where thermal stability is critical.
- Automotive under‑hood components such as intake manifolds or sensor housings.
- Consumer electronics that require both aesthetic black finish and high‑temperature resistance.
Expanding Lumia X1’s Manufacturing Envelope
By integrating xMOLD and ATARU BLACK, Axtra3D positions the Lumia X1 as a dual‑path platform:
- Indirect manufacturing – rapid tooling for injection molding via dissolvable molds.
- Direct engineering production – high‑temperature, load‑bearing parts printed in‑house.
Both routes benefit