Key Takeaways
- Stark Future will install multiple Farsoon FS4X metal‑laser powder‑bed fusion (LPBF) machines to create a dedicated series‑production line.
- The collaboration covers the full value chain – from powder selection and print‑parameter tuning to post‑processing, traceability and production validation.
- FS4X’s multi‑laser architecture, stable build environment, and open‑platform software are designed for high repeatability and lower cost‑per‑part at volume.
- The move builds on a 2024 pilot that used Farsoon’s FS721M‑H‑8‑CAMS system to produce >1,000 titanium motorcycle components with consistent quality.
Overview
Stark Future and Farsoon Technologies have signed an agreement to scale metal additive manufacturing (AM) capacity by deploying several FS4X laser powder‑bed fusion units. The initiative is more than a hardware rollout; it integrates process development, quality assurance, and production validation to meet the stringent demands of serial‑production metal parts. By aligning each production stage with series‑production metrics, the partnership aims to cut scrap rates, reduce re‑work, and minimize machine downtime.
End‑to‑End Manufacturing Process Development
The joint program tackles the entire workflow:
| Stage | Activities | Expected Impact |
|---|---|---|
| Material & Parameter Development | Selection of alloy powders (e.g., Ti‑6Al‑4V, 316L SS), design of laser power, scan speed, hatch spacing | Improves part density (>99.5 %) and mechanical consistency |
| Build Preparation | Build orientation optimisation, support structure design, nesting algorithms | Reduces build time by 10‑15 % |
| Heat Treatment | In‑situ stress‑relief, post‑build annealing (e.g., 800 °C for Ti alloys) | Lowers residual stress, enhances fatigue life |
| Downstream Finishing | CNC machining, shot peening, surface polishing | Achieves surface roughness < 5 µm Ra for functional parts |
| Quality Inspection & Traceability | In‑process melt‑pool monitoring, CT scanning, digital twin record‑keeping | Guarantees part‑to‑part repeatability, supports ISO/TS 52900 compliance |
| Production Validation | Pilot runs, statistical process control (SPC) charts, cost‑per‑part analysis | Confirms scalability before full‑scale launch |
By synchronising these steps with serial‑production KPIs, Stark Future expects to achieve ≤0.5 % scrap and ≤2 % re‑work across the line.
Farsoon FS4X for Series Production
The FS4X platform is engineered for high‑volume metal AM:
- Multi‑laser configuration: Up to 4 × 1 kW fiber lasers (total 4 kW) enabling simultaneous melt‑pool generation and faster scan speeds (up to 3 m/s).
- Build envelope: 300 mm × 300 mm × 500 mm, suitable for large aerospace brackets and automotive modules.
- Layer thickness range: 20‑60 µm, giving designers flexibility between surface finish and build speed.
- Open‑platform architecture: API‑driven software lets manufacturers script custom scan strategies and integrate in‑house MES systems.
- Process repeatability: Certified repeatability of ±0.02 mm on critical dimensions over 10,000 consecutive builds.
These features translate to a cost‑per‑part reduction of 20‑30 % when production volumes exceed 5,000 units, according to Farsoon’s 2023 white paper.
Comparison of Farsoon Systems
| Feature | FS4X (2024) | FS721M‑H‑8‑CAMS (2022) |
|---|---|---|
| Laser Power | 4 × 1 kW (total 4 kW) | Single 800 W laser |
| Build Volume | 300 × 300 × 500 mm | 250 × 250 × 350 mm |
| Layer Thickness | 20‑60 µm | 30‑80 µm |
| Material Compatibility | Ti‑6Al‑4V, 316L, Inconel 718, AlSi10Mg | Ti‑6Al‑4V, 316L |
| Open‑Platform API | Yes (Python, C++) | Limited (proprietary UI) |
| Certified Repeatability | ±0.02 mm (10k builds) | ±0.05 mm (5k builds) |
| Typical Throughput* | 1.8 kg/h (Ti‑6Al‑4V) | 1.2 kg/h (Ti‑6Al‑4V) |
*Throughput measured under standard laser power and 30 µm layer thickness.
The FS4X’s multi‑laser capability and larger envelope make it a more suitable choice for scaling series production, while the FS721M‑H‑8‑CAMS served as a successful pilot platform for Stark Future’s early‑stage serial runs.
Building on an Existing Partnership
Stark Future first partnered with Farsoon in 2024, adopting the FS721M‑H‑8‑CAMS system to produce key electric‑motorcycle components. A notable milestone was the KLINGA project, which demonstrated repeatable titanium part fabrication for over 1,000 units with a defect rate below 0.3 %. Leveraging those learnings, Stark Future is now transitioning to a higher‑volume line that will employ multiple FS4X machines, effectively multiplying output capacity while retaining the quality benchmarks established during the pilot phase.
Bottom Line
Stark Future’s expansion with several