Industry News

UAE’s Largest Galvanising Kettle Set to Come to Life at Metal Park

UAE’s Largest Galvanising Kettle Set to Come to Life at Metal Park

Key Takeaways

  • 825 t of zinc have arrived at Metal Park’s KEZAD hub, enabling the first melt for the UAE’s biggest hot‑dip galvanising kettle.
  • The 16.2 m kettle holds 610 t of molten zinc at ~450 °C and can treat up to 150 000 t / yr of steel.
  • Double‑dip capability accommodates structures up to 5.5 m in height, eliminating the need for segmenting large components.
  • A lead‑free zinc bath, on‑site zinc recycling, fume‑treatment and heat‑recovery cut fuel use by ≈30 %.
  • Fabricators inside Metal Park gain “door‑to‑door” galvanising, slashing logistics costs and project lead times.

Introduction

Metal Park’s Production Hub in KEZAD, Abu Dhabi, has just received a full shipment of 825 tonnes of zinc, the final material prerequisite before Galva Hub initiates the first melt of the Emirates’ largest hot‑dip galvanising kettle. This milestone marks a strategic shift for the regional steel‑fabrication sector, moving the galvanising process from overseas contracts to a domestic, purpose‑built ecosystem.


The Galva Hub Kettle – Size, Capacity, and Process

Physical Dimensions

Parameter Value
Kettle length 16.2 m
Width (max) 2.5 m (standard) / 2.0 m (reduced)
Depth 3.5 m
Maximum dipped height ≈5.5 m (double‑dip)

Operational Specs

  • Molten zinc inventory: 610 t at ~450 °C.
  • Annual galvanising capacity: 150 000 t of steel (≈ 410 t / day at 100 % utilisation).
  • Process standards: ISO 1461 & ASTM A123.
  • Bath chemistry: Lead‑free zinc alloy with continuous on‑site recycling.

Production Flow

  1. Cleaning & fluxing – steel is blasted and coated with a zinc‑ammonium chloride flux.
  2. Immersion – part or whole component is lowered into the molten bath.
  3. Cooling & inspection – the coated part exits, solidifies, and undergoes visual & thickness checks.

The kettle’s double‑dip design enables a single pass for large beams, columns, transmission poles, bridge girders, telecom towers, and port infrastructure, cutting the number of handling cycles dramatically.


Why Local Galvanising Matters

Traditional Approach vs. Galva Hub (Comparison Table)

Aspect Conventional overseas galvanising Galva Hub (KEZAD)
Transport distance 300–800 km (often by sea) < 5 km (within Metal Park)
Project lead time 4–8 weeks (including customs) 1–2 weeks (on‑site)
Structural segmentation Required for > 5 m components Not required – full‑size dip
Fuel consumption Baseline (no heat‑recovery) ↓ 30 % thanks to waste‑heat reuse
Environmental impact Higher emissions from logistics Lead‑free bath & fume capture
Annual capacity 60 000 t (typical regional plants) 150 000 t (Galva Hub)

The table illustrates that Galva Hub delivers a 2‑3× capacity boost, while slashing logistics costs and carbon footprint.


Sustainability Features

  • Lead‑free zinc alloy eliminates hazardous metal discharge, complying with the latest EU REACH restrictions.
  • Closed‑loop zinc recycling recovers up to 98 % of the bath metal after each dip cycle.
  • Fume treatment system captures zinc oxide particles, achieving > 99 % removal efficiency before venting.
  • Heat‑recovery unit captures exhaust heat to pre‑heat incoming zinc, delivering an estimated 30 % reduction in natural‑gas fuel demand.

Industry Voices

“The arrival of 825 t of zinc means the UAE can now protect its largest steel structures without cutting them up or shipping them abroad,” says Vahid Fouladkar, CEO of Metal Park.

Shadi Nemeh, CEO of Galva Hub, adds, “Our kettle consolidates two decades of galvanising know‑how into a single, purpose‑engineered line. The dimensions allow us to coat complex, oversized sections in far fewer dips, while the lead‑free process meets the toughest environmental standards.”


Bottom Line

Metal Park’s new Galva Hub kettle transforms the Gulf’s steel‑fabrication supply chain by delivering a home‑grown, high‑capacity, environmentally responsible hot‑dip galvanising solution. With a 16.2 m bath capable of treating 150 000 t of steel each year, the facility eliminates the need for costly segmentation and overseas shipping, reduces fuel use by roughly one‑third, and aligns with global sustainability mandates. For fabricators operating inside Metal Park, the result is faster project delivery, lower logistics overhead, and a greener production footprint—all within a few minutes of the workshop floor.

Related Articles