Key Takeaways
- Peopoly launches the Giga 800, a large-format pellet 3D printer with a build volume of 800 x 800 x 800 mm
- The Giga 800 uses Fused Granular Fabrication (FGF) technology and has a starting price of $15,000
- The printer features a dual-zone screw extruder with a maximum flow rate of 3 kg of polymer per hour
- The Giga 800 is designed for print farms, design studios, and engineering teams, and is available to commercial partners through an early adopter phase
Introduction to the Giga 800
Peopoly has introduced the Giga 800, a large-format pellet 3D printer that utilizes Fused Granular Fabrication (FGF) technology. This innovative printer is designed to produce large-scale prints with a build volume of 800 x 800 x 800 mm, making it an ideal solution for print farms, design studios, and engineering teams.
Technical Specifications
The Giga 800 features a dual-zone screw extruder that can handle raw industrial pellets, with a maximum flow rate of 3 kg of polymer per hour. This approach enables the production of larger parts as single builds, rather than multi-part assemblies, and can reduce material costs compared to traditional FDM filament printing. The printer also uses a closed-loop servo CoreXY motion system, which provides continuous positional feedback and supports consistent operation during extended print runs.
Comparison of FGF and FDM Printing Technologies
| Technology | Build Volume | Material Costs | Print Speed |
|---|---|---|---|
| FGF (Giga 800) | 800 x 800 x 800 mm | Lower | Up to 3 kg/h |
| FDM (Traditional) | Limited by filament size | Higher | Variable |
Addressing Common Pellet-Printing Issues
The Giga 800 addresses common issues such as oozing and stringing by combining active mechanical retraction with Klipper's Pressure Advance. Additionally, Peopoly has partnered with Siraya Tech's material science team to provide tested, preconfigured material profiles, ensuring high-quality prints.
Security and Firmware
The Giga 800 runs on open-source Klipper firmware, allowing users to operate the printer in air-gapped environments without an internet connection. This feature is particularly important for users in defense, aerospace, and research applications, where design and print data must remain on-site.
Availability and Pricing
The Peopoly Giga 800 is available to commercial partners through an early adopter phase, with a starting price of $15,000. For more information, visit peopoly.net or submit an application through this form.
Bottom Line
The Peopoly Giga 800 is a game-changing large-format pellet 3D printer that offers a unique combination of high-quality prints, reduced material costs, and advanced security features. With its impressive build volume and technical specifications, the Giga 800 is poised to revolutionize the 3D printing industry, particularly in applications where large-scale prints are required.