Dieser Artikel wird auf Englisch angezeigt — eine Übersetzung ist noch nicht verfügbar.

3D Printing

Axtra3D adds wash and cure systems for post-processing

Axtra3D adds wash and cure systems for post-processing

Key Takeaways

  • Axtra Wash Series 1 merges automated washing, drying, and part‑handling in a single stainless‑steel station (50 L tanks, Venturi + nanobubble agitation).
  • Axtra Cure Series 1 offers a dual‑chamber post‑processor with programmable UV (365 nm, 385 nm, 405 nm, 324 LEDs) and a thermal oven for combined or separate curing.
  • Both systems integrate with the Lumia X1 Hi‑Speed SLA printer and Axtra3D’s cloud‑based workflow software, delivering repeatable cycle times and real‑time process monitoring.
  • Automated detergent loading, exhaust filtration, and touchscreen UI cut manual labor by up to 40 % (per Axtra3D internal testing).
  • Flexible solvent modes and customizable exposure profiles make the platforms suitable for a wide range of photopolymers and hybrid resin‑metal parts.

Introduction: Extending the Axtra3D Workflow

Axtra3D has broadened its end‑to‑end additive‑manufacturing suite with two new post‑processing units—Axtra Wash Series 1 and Axtra Cure Series 1. Designed to sit directly after the Lumia X1 SLA printer, the machines aim to eliminate the “black‑box” steps of cleaning, drying, and curing that traditionally introduce variability in production runs.


Axtra Wash Series 1 – Integrated Cleaning & Drying

Core Features

Feature Specification
Washing volume Two removable 50 L stainless‑steel tanks
Agitation technology Proprietary Venturi flow + nanobubble eductor
Drying method Automated traveling air‑knife (compressed‑air)
Detergent compatibility Non‑flammable, ISO‑9001‑approved solutions
Control interface 10‑inch capacitive touchscreen, custom/profile storage
Safety End‑of‑cycle exhaust with activated‑carbon filter; vapor monitoring sensors
Construction Anodized‑aluminum frame matching Lumia X1 aesthetics
Cycle time Typical wash + dry: 6–9 min (depends on part geometry)

Operational Benefits

  • Reduced handling: Robotic part‑transfer from the build platform to the wash tub cuts operator contact by ~30 %.
  • Process repeatability: Pre‑programmed cycles lock in agitation speed, detergent concentration, and drying pressure, delivering part‑to‑part consistency within ±2 % of target surface cleanliness.
  • Maintenance simplicity: Self‑cleaning chamber and real‑time filtration alerts lower scheduled downtime to <1 hour per month.

Axtra Cure Series 1 – Programmable UV & Thermal Treatment

Core Features

Feature Specification
UV chamber 324 high‑power LEDs, selectable wavelengths: 365 nm, 385 nm, 405 nm
UV power Up to 12 W cm⁻² per wavelength, with broadband photodiode feedback
Thermal oven Independent lower chamber, temperature range 30 °C–200 °C, ramp rate 5 °C min⁻¹
Exposure control Programmable time (0.1–300 s) and intensity per wavelength
Temperature sensing Integrated thermocouples ±0.5 °C accuracy
Interface Same 10‑inch touchscreen as Wash series; API for software‑level scheduling
Footprint 1.2 m × 0.8 m × 1.6 m (L × W × H) – fits standard production cells

Operational Benefits

  • Material flexibility: Users can select a single wavelength for standard resins or combine 365 nm + 405 nm for high‑performance composites, achieving cure depths up to 2 mm per pass.
  • Hybrid processing: Simultaneous UV exposure and thermal bake (e.g., 80 °C for 60 s) reduces total post‑cure time by up to 35 % versus sequential processing.
  • Traceability: Cycle logs are automatically uploaded to Axtra3D’s cloud dashboard, supporting ISO 13485 and aerospace Q‑record requirements.

Comparative Overview

Attribute Axtra Wash Series 1 Axtra Cure Series 1
Primary function Clean & dry printed parts UV and/or thermal post‑cure
Automation level 85 % (auto load/unload, self‑clean) 80 % (auto cycle start, data logging)
Typical cycle time* 6–9 min 30–120 s (UV) + optional 60 s bake
Compatible detergents Non‑flammable, ISO‑approved N/A
Energy consumption 2.2 kW (peak) 1.8 kW (UV) + 1.2 kW (thermal)
Footprint 1.0 m × 0.7 m × 1.4 m 1.2 m × 0.8 m × 1.6 m
Integration Direct API to Lumia X1 & Axtra Cloud Same API, shared UI
Target users High‑volume prototyping & small‑batch production Aerospace, medical, high‑performance resin users

*Cycle times are representative of a 150 mm × 150 mm × 100 mm part; actual times vary with geometry and material.


How the New Systems Fit Into a Production Line

  1. Print – Lumia X1 deposits a resin layer at up to 200 mm h⁻¹.
  2. Transfer – Built‑in robotic arm moves the build plate to the Wash station.
  3. Wash & Dry – Automated agitation removes uncured resin; air‑knife dries the part without manual wiping.
  4. Cure – Parts travel to the Cure unit where UV exposure (

Ähnliche Artikel