Key Takeaways
- SEW‑EURODRIVE adds the PxG economy series (P1.G, P2.G, P3.G) to its planetary servo gear line, targeting low‑to‑medium‑demand automation.
- Torque capacity spans 11 Nm – 500 Nm, with rotational accuracy of 6‑12 arcmin and a projected service life > 20,000 h.
- Three performance classes let OEMs size gear units to the exact mechanical load, avoiding overspecification of the higher‑precision P5‑P7 range.
- Modular options include one‑ or two‑stage gearing, solid‑shaft, keyed or splined outputs, food‑grade lubrication, and multiple mounting interfaces.
- Integrated with SEW‑EURODRIVE’s engineering suites (SEW‑Workbench, DriveCAD, DriveConfigurator) for rapid system design and validation.
SEW‑EURODRIVE Broadens PxG Lineup With an Economy Tier
SEW‑EURODRIVE has announced the PxG economy series, a trio of planetary servo gear units (P1.G, P2.G, P3.G) that sit beneath the existing precision‑oriented P5.G, P6.G, and P7.G models. The new line gives machine builders and OEMs a cost‑effective alternative for standard industrial automation where ultra‑high precision is not a prerequisite.
Right‑Sized Performance for Everyday Automation
The economy series is engineered for applications that demand reliable torque and moderate positioning accuracy without the premium price tag of high‑precision gearboxes. Typical installations include:
- Packaging lines (e.g., case sealers, stretch wrappers)
- Assembly stations and pick‑and‑place equipment
- Material‑handling conveyors and palletizers
- Carton erectors and box‑forming machines
- Gantry‑type robots and machine‑tool portals
Each model addresses a distinct load envelope:
| Model | Peak Torque (Nm) | Typical Load Profile | Bearing Type | Cost‑Optimisation Feature |
|---|---|---|---|---|
| P1.G | 11 – 70 | Light overhung loads, low radial forces | Standard angular contact | Straight‑gear train, minimal bearing size |
| P2.G | 71 – 250 | Moderate radial loads, higher inertia | Reinforced angular contact | Two‑stage gearing option, larger bearing outer diameter |
| P3.G | 251 – 500 | High‑capacity shafts, demanding mechanical stress | Heavy‑duty tapered roller | Cost‑effective straight gearing with oversized bearings |
Compared with the precision family (P5‑P7), the economy series reduces unit cost by 30‑45 % while delivering adequate accuracy for the listed applications.
A More Modular Servo Platform
The PxG economy units are offered in five physical sizes, allowing designers to select the smallest possible footprint that meets torque requirements. Key technical data include:
- Rotational clearance: 6 – 12 arcminutes (typical 9 arcmin)
- Service life: > 20,000 hours at rated load, verified under ISO 6336 testing
- Configuration: Single‑stage or dual‑stage planetary gear sets
- Output shafts: Solid‑shaft, keyed, or splined options per model
- Lubrication: Standard mineral oil or FDA‑compliant food‑grade options
Mounting flexibility is built in through four standardized interfaces (flange, foot, baseplate, and modular bracket), simplifying integration across a wide range of machine frames.
Seamless Integration With SEW‑EURODRIVE Design Tools
All PxG economy units are pre‑loaded into SEW‑EURODRIVE’s digital ecosystem:
- SEW‑Workbench – rapid 3‑D visualization and clash detection.
- DriveCAD – automated torque, speed, and efficiency calculations.
- DriveConfigurator – generation of motor‑controller pairings and wiring diagrams.
These tools accelerate the engineering cycle, reducing time‑to‑market by an estimated 15‑20 % for typical automation projects.
Bottom Line
The introduction of the PxG economy series fills a strategic gap in SEW‑EURODRIVE’s product portfolio, offering a cost‑efficient, modular servo gear solution for low‑to‑medium demand automation. With torque ratings up to 500 Nm, accuracy suitable for most standard machines, and integration into SEW’s proven engineering suite, the P1.G‑P3.G line enables OEMs to match performance precisely to application needs—eliminating the expense of over‑specification while maintaining the reliability SEW‑EURODRIVE is known for.