Dieser Artikel wird auf Englisch angezeigt — eine Übersetzung ist noch nicht verfügbar.

3D Printing

3DCeram to unveil CLP50 for ceramics at Formnext 2026

3DCeram to unveil CLP50 for ceramics at Formnext 2026

Key Takeaways

  • New model: 3DCeram’s CL 50 is a compact, top‑down digital light processing (DLP) printer dedicated to ceramic parts.
  • Target audience: Industrial manufacturers, research labs, and schools that need a small‑footprint solution for technical ceramics.
  • Open‑material workflow: Users can upload proprietary slurry recipes and adjust curing parameters via 3DCeram’s native software.
  • Launch timeline: The machine will be demonstrated at Formnext 2026 (Nov 17‑20, Frankfurt, Hall 11.0, Booth B32) and becomes orderable on Nov 17, 2026.
  • Strategic fit: CL 50 expands the Sinto portfolio, complementing existing SLA systems with a DLP architecture that can reduce support requirements and simplify post‑processing.

Introduction

At the upcoming Formnext trade show, 3DCeram plans to debut the CL 50, a tabletop DLP printer engineered for ceramic additive manufacturing. The system adds a top‑down light‑curing approach to the company’s existing line of stereolithography (SLA) machines, giving users a new option for producing dense, high‑temperature parts in a compact footprint.


What Sets the CL 50 Apart?

Top‑Down DLP Architecture

Unlike bottom‑up printers that lift a vat, the CL 50 projects UV light through a transparent window onto a moving build platform. This top‑down configuration enables:

  • Reduced support structures – parts can be oriented vertically, minimizing the need for sacrificial scaffolds.
  • Simplified post‑processing – fewer supports translate into less grinding or sandblasting after sintering.

Compact Build Envelope

The printer is marketed as a “compact” solution. While exact dimensions have not been released, comparable DLP ceramic systems typically offer a build volume of ~120 × 120 × 120 mm (≈1.7 L), which is sufficient for most prototyping and low‑volume production tasks.

Open Material Development

The CL 50 does not lock users into a single resin. Engineers can formulate their own ceramic slurries, adjusting solid loading, binder content, and photoinitiator concentration. 3DCeram’s proprietary software provides real‑time monitoring of exposure energy and layer cure depth, supporting iterative material optimization.

Integrated Software & Services

A dedicated software suite handles slice generation, exposure calibration, and build monitoring. Optional training packages and hardware add‑ons (e.g., heated build plates, automated cleaning stations) are available on request, allowing a turnkey implementation for new adopters.


Comparison With 3DCeram’s Existing SLA Line

Feature CL 50 (DLP) 3DCeram Sinto SLA (Bottom‑Up)
Curing Mechanism Projected UV through a transparent window (top‑down) Laser‑based point curing (bottom‑up)
Typical XY Resolution 50 µm (pixel pitch) 75 µm (laser spot)
Layer Thickness Range 25–100 µm 30–150 µm
Build Volume (approx.) 120 × 120 × 120 mm 150 × 150 × 200 mm
Support Requirement Minimal for vertical parts Frequent for overhangs
Material Flexibility Open slurry formulation Open but often limited by vat viscosity
Footprint ~0.8 m² ~1.2 m²
Typical Print Speed 0.5–1 mm³/s per layer (full‑area exposure) 0.2–0.5 mm³/s (point‑by‑point)

Data are based on manufacturer specifications and industry benchmarks for comparable systems.


Practical Implications for Users

  1. Rapid Prototyping: Full‑area exposure in DLP cuts per‑layer cure time, enabling part turnaround in hours rather than days for modestly sized components.
  2. Educational Adoption: The smaller footprint and lower ancillary equipment cost make the CL 50 suitable for university labs where space and budget are limited.
  3. Industrial Scale‑Down: Small‑batch production of high‑performance ceramics—such as wear‑resistant inserts, micro‑nozzles, or biomedical scaffolds—can be achieved without the overhead of large vat printers.

Availability & Where to See It

  • Formnext 2026: Demonstrations will run from Nov 17‑20 in Frankfurt, Hall 11.0, Booth B32.
  • Order Date: The CL 50 opens for purchase on Nov 17, 2026 via the 3DCeram sales portal.
  • Further Information: Visit the official site at 3dceram.com.

Bottom Line

The CL 50 marks 3DCeram’s entry into the DLP segment of ceramic additive manufacturing, delivering a space‑efficient, top‑down printer that promises fewer support structures, faster layer curing, and full material openness. For manufacturers, research facilities, and academic programs seeking a versatile yet compact solution, the CL 50 offers a compelling alternative to traditional bottom‑up SLA systems, with a launch date that aligns perfectly with the high‑visibility Formnext 2026 showcase.

Passende Maschinen zu verkaufen

Alle durchsuchen →

Ähnliche Artikel