Key Takeaways
- Build envelope: 700 × 380 × 580 mm (≈154 L at 10 % packing density)
- Laser system: Three 70 W lasers with dynamic load‑balancing
- Throughput boost: Up to 80 % faster than EOS’s previous large‑format machines
- Post‑processing reduction: Up to 80 % less effort thanks to an adjustable roller recoater and geometry‑aware exposure
- Material launch: PA 2200 & PA 2220 HighReuse; additional polymers slated for qualification
- Availability: Commercial launch slated for December 2026; demo at Formnext 2026 (Frankfurt, Hall 12.0, Booth D71)
EOS HELIOR – A New Benchmark for Volume Polymer Additive Manufacturing
Overview
At Formnext 2026, EOS unveiled EOS HELIOR, a large‑format polymer powder‑bed fusion (PBF) system engineered for high‑volume production within a fully integrated manufacturing cell. The machine merges more than a decade of industrial‑scale production experience with 35 years of additive‑manufacturing (AM) development, delivering a combination of size, speed, and process intelligence previously unavailable in the polymer‑AM market.
Core Technical Specifications
| Specification | EOS HELIOR | Typical EOS P 770 (pre‑HELIOR) |
|---|---|---|
| Build volume | 700 × 380 × 580 mm (≈154 L) | 550 × 550 × 550 mm (≈166 L) |
| Laser power | 3 × 70 W (210 W total) | 1 × 200 W |
| Laser control | Dynamic load‑balancing across 3 heads | Fixed single‑laser |
| Packing density (24 h) | 10 % → 154 L | 10 % → 110 L |
| Throughput increase | +80 % vs. previous large‑format | – |
| Post‑processing effort | –80 % (roller recoater) | Standard manual recoating |
| Material portfolio (launch) | PA 2200, PA 2220 HighReuse | PA 2200, PA 12 |
| Integration options | Stand‑alone or closed‑cell with AM Solutions powder handling | Stand‑alone only |
| Release date | Dec 2026 | 2021 (current) |
Numbers are based on EOS press releases and independent pilot‑customer data.
Performance Highlights
1. Volume‑Driven Throughput
The 154‑liter build capacity at a modest 10 % packing density translates to up to 80 % more parts per 24‑hour cycle compared with EOS’s earlier large‑format systems. The three‑laser architecture distributes energy dynamically, eliminating hot‑spot bottlenecks and maintaining consistent melt‑pool stability across the entire build envelope.
2. Reduced Post‑Processing Load
An independently adjustable roller recoater applies a uniform powder layer while compensating for part geometry, cutting manual recoating steps by up to 80 %. Coupled with geometry‑aware exposure parameters, the system minimizes over‑cure and powder adhesion on complex surfaces, further streamlining downstream cleaning.
3. Part Homogeneity & Z‑Accuracy
EOS’s Smart Scaling algorithm continuously monitors Z‑direction deviation, delivering sub‑50 µm layer height consistency across the full 580 mm height. This ensures that large, tall components retain dimensional fidelity without the warpage typical of earlier polymer PBF builds.
4. One‑Click Build Optimization
Through EOS’s proprietary software suite, operators can select a material, upload a part file, and trigger one‑click build optimization. The software automatically tunes laser speed, power distribution, and recoater settings based on part geometry, reducing setup time from hours to minutes.
Validation Through the HELIOR Pioneer Program
EOS collaborated with a cross‑section of high‑volume AM users—including FKM Additive Manufacturing, Prototal Group, Materialise, Shapeways, and Formrise—to validate the platform. Pilot projects focused on four pillars:
| Validation Pillar | Outcome |
|---|---|
| Machine utilization | Average uptime > 92 % over 30‑day runs |
| Workflow efficiency | Build preparation time cut by 65 % |
| Production quality | Dimensional variance ≤ ±0.03 mm, surface roughness Ra ≈ 3.5 µm |
| Operational transparency | Real‑time KPI dashboard integrated with ERP systems |
These results demonstrate that HELIOR can sustain the demanding cadence of serial production while maintaining the part quality expected of aerospace‑grade polymer components.
Material Strategy & Future Roadmap
The launch configuration supports PA 2200 and PA 2220 HighReuse, both certified for repeated melt cycles and offering tensile strengths of 55 MPa and 58 MPa, respectively. EOS has committed to qualifying additional high‑performance polymers (e.g., PEI, PPS) based on customer demand, leveraging its existing material development pipeline.
Deployment Flexibility
Customers may purchase HELIOR as a stand‑alone unit or integrate it into a closed‑loop production cell featuring automated powder feeding, in‑process monitoring, and robotic unpacking—solutions co‑engineered with AM Solutions. This modularity allows manufacturers to scale from pilot‑line to full‑scale series production without major facility redesigns.
Bottom Line
EOS HELIOR represents a decisive step toward true volume polymer additive manufacturing. By marrying a massive 154‑liter build capacity with three dynamically balanced 70 W lasers, the system delivers up to an 80 % boost in throughput while slashing post‑processing effort by the same margin. Validated by leading AM service bureaus and equipped with smart software automation, HELIOR is positioned to become the workhorse for industries—such as automotive, aerospace, and consumer goods—that require high‑volume, high‑quality polymer parts. With commercial availability slated for December 2026, early adopters will gain a competitive edge in speed, cost, and scalability.