Key Takeaways
- HeyGears’ G1X Series hat über $15 Millionen auf Kickstarter eingeworben und ist damit der am besten finanzierte Desktop-Full-Color-3D/UV-Drucker bis heute.
- Unterstützer können $500 + cashback (bis zu $3,099 nach Rabatt) für einen begrenzten Zeitraum erhalten.
- Die Plattform wird in drei Konfigurationen geliefert – UV, Fabric-Print und Full-Color 3D – jede optimiert für einen eigenen Workflow, jedoch über modulare Upgrades austauschbar.
- Druckgeschwindigkeiten sind bis zu 12× schneller als bei herkömmlichen Desktop-UV-Druckern, und der Tintenverbrauch wird dank eines proprietären Niedrig-Volumen-Kartuschensystems um ≈30 % reduziert.
One Modular Platform, Three Targeted Workflows
HeyGears designed the G1X Series as a single chassis that can be re-configured to meet the needs of makers, small-batch manufacturers, and design studios. The three factory-configured variants share a 300 mm × 300 mm build envelope, a 0.1 mm layer resolution, and a unified control software that toggles between 2-D UV, fabric, and full-color 3D modes with a few clicks.
| Variant | Net price after cashback* | Core capability | Typical print speed* | Ink/Material system | Expandability |
|---|---|---|---|---|---|
| UV Version | $2,799 | 2-D UV curing on rigid substrates (plastic, metal, glass) | 30 mm · s⁻¹ (≈12× faster than legacy desktop UV) | UV-LED (365 nm) + low-viscosity CMYK | Can add Fabric or Full-Color 3D module |
| Fabric Print Version | $2,849 | Direct-to-Garment (DTG) & Direct-to-Film (DTF) on cotton, polyester, blends | 25 mm · s⁻¹ (≈10× faster than typical DTG) | Aqueous pigment ink (eco-friendly) | Swappable to UV or Full-Color 3D |
| Full-Color 3D Version | $3,099 | Full-color additive manufacturing with water-soluble supports | 20 mm · s⁻¹ (≈8× faster than entry-level color SLA) | Dual-extruder: CMYK + support (PVA) | Can downgrade to UV or Fabric mode |
*Speeds are measured at a 0.2 mm layer height on standard media; actual rates vary with geometry and color density.
UV Version – Speed, Gamut, and Future-Proofing
The UV configuration targets rapid prototyping and small-run signage. Its 365 nm LED array delivers a wide color gamut (ΔE < 2) and a 12× speed boost versus conventional desktop UV printers that rely on slower mercury lamps. Ink cartridges hold 15 ml per color, cutting material cost by roughly 30 % per square meter. The module’s firmware supports auto-focus and real-time color profiling, ensuring consistent output across different rigid media.
When demand shifts, the UV unit can be retrofitted with either the Fabric Print or Full-Color 3D kit in under two hours, preserving the original investment.
Fabric Print Version – Apparel-Ready Performance
Designed for on-demand fashion and promotional wear, the Fabric version employs specialized aqueous pigments that bond to cotton, polyester, and blended fabrics without pre-treatment. It handles DTG (direct-to-garment) and DTF (direct-to-film) workflows, enabling users to print on garments or produce transfer films for heat-press applications. The system’s dual-nozzle head switches between pigment and adhesive inks in under 5 seconds, delivering high-resolution (≤ 150 dpi) prints at speeds comparable to mid-range industrial DTG machines.
Full-Color 3D Version – Industrial Quality at a Desktop Price
The flagship configuration brings industrial-grade full-color additive manufacturing to a 30 × 30 × 30 cm desktop footprint. Dual extruders lay down CMYK photopolymer resin and a water-soluble PVA support that dissolves in warm water, eliminating the need for mechanical support removal. Layer thickness can be set from 0.05 mm to 0.2 mm, and the printer achieves ≈ 0.9 mm³ · min⁻¹ material deposition—roughly 8× faster than entry-level color SLA printers.
Why the $500+ Cashback Matters
Kickstarter’s $15 M milestone unlocks a tiered rebate program: early backers receive a flat $500 rebate, while those who pledge after the $10 M mark obtain an additional $200 discount. The net pricing listed above reflects the maximum rebate, effectively positioning the G1X Series below $3,100 for any configuration—a price point previously reserved for single-function printers.
Bottom Line
HeyGears’ G1X Series demonstrates that a truly modular desktop printer can serve disparate markets—UV signage, custom apparel, and full-color 3D printing—without sacrificing speed or color fidelity. The $15 M Kickstarter backing validates strong market demand, while the limited-time $500 + cashback makes the technology financially reachable for small businesses and serious hobbyists alike. For creators who need flexibility now and anticipate new material needs tomorrow, the G1X Series offers a compelling, future-proof investment.
